China Hb PV Industrial High Power Torque Right Angle Bevel Helical Gear Box bevel helical gearbox application

Solution Description

HB PV Sq. Massive Load Industrial High Electricity Torque Right Angle Bevel Helical Equipment box

Functions:
1. High efficiency and conserve electrical power.
2. Wide velocity ranges and higher torque.
3. Multi-structure, numerous assembling methods.
4. Substantial loading assist, steady transmitting and minimal sounds amount.
five. Exceptional sealing, vast selection of industry software.
6. It adopts different cooling and lubricating modes.

Product picture:

Specification:

ANG HB Industrial Gear box
Type Helical parallel shaft type, Bevel-helical proper-angle variety
Model H1/B1~H26/B26
Input electricity three ~ 5000 KW
Enter speed 750rpm ~ 1500rpm
Reduction ratio 1/1.twenty five ~ 1/450
Output torque  3 ~ 900kN.m
Install type Foot / Strong shaft / Hollow shaft / Output flange…
Efficiency One-stage ninety eight%, 2-stage 96%, 3-phase ninety four%, 4-stage 92%
Precision of equipment Exact grinding, class 6
Layout position A / B / C / D / E / F / G / H / I
Components Again end / Cooling supporter / Cooling coil / Oil pump / Compensation tank …

Standard Application 

♦ Coal mining
♦ Power Plant Equipment 
♦ Metallurgical Industry 
♦ Metal Forming Machinery 
♦ Petrochemical Industry 
♦ Mining Machine 
♦ Hoisting Machinery 
♦ Cement and building Industry 
♦ Environmental Defense Industry 
♦ Cable Industry 
♦ Chemical market
♦ Food Machinery 

Models
 
Horizontal:
Parallel shaft equipment device box 
H1SH1, H1SH3, H1SH5, H1SH7, H1SH9, H1SH11, H1SH13, H1SH15, H1SH17, H1SH19
H2SH, H2HH, H2DH, H2KH, H2FH, H3SH, H3HH, H3DH, H3HM, H3DM, H4SH, H4HH, H4DH, H4HM, H4DM
 
Bevel helical correct angle equipment unit
B2SH, B2HH, B2DH, B2HM, B2DM, B3SH, B3HH, B3DH, B3HM, B3DM, B4SH, B4HH, B4DH, B4HM, B4DM
 
Vertical:
Parallel shaft equipment unit box 
H2SV, H2HV, H2DV, H3SV, H3DV, H4SV, H4HV, H4DV, H4KV, H4FV 
 
Bevel helical appropriate angle equipment device
B2SV, B2HV, B2DV, B3SV, B3HV, B3DV, B4SV, B4HV, B4DV, B4KV, B4FV

FAQ
Q: Can you make the equipment box with customization?
A: Of course, we can personalize for each your request, like flange, shaft, configuration, substance, etc.

Q: Do you offer samples?
A: Of course. Sample is available for tests.

Q: What is your MOQ?
A: It is 10pcs for the starting of our company.

Q: What is actually your guide time?
A: Regular merchandise need to have 5-30days, a little bit longer for personalized products.

Q: Do you give technologies assist?
A: Sure. Our organization have layout and improvement group, we can provide engineering help if you
want.

Q: How to ship to us?
A: It is obtainable by air, or by sea, or by prepare.

Q: How to shell out the money?
A: T/T and L/C is chosen, with diverse currency, like USD, EUR, RMB, and so forth.

Q: How can I know the item is suited for me?
A: >1ST verify drawing and specification >2nd take a look at sample >3rd start off mass manufacturing.

Q: Can I occur to your company to go to?
A: Of course, you are welcome to pay a visit to us at any time.

Q: How shall we get in touch with you?
A: You can send inquiry directly, and we will answer inside 24 hours.

 

US $500-1,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Right Angle
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

ANG HB Industrial Gear box
Type Helical parallel shaft type, Bevel-helical right-angle type
Model H1/B1~H26/B26
Input power 3 ~ 5000 KW;
Input speed 750rpm ~ 1500rpm
Reduction ratio 1/1.25 ~ 1/450
Output torque  3 ~ 900kN.m
Install type Foot / Solid shaft / Hollow shaft / Output flange…
Efficiency Single-stage 98%, 2-stage 96%, 3-stage 94%, 4-stage 92%
Precision of gear Accurate grinding, class 6
Design position A / B / C / D / E / F / G / H / I
Accessories Back stop / Cooling fan / Cooling coil / Oil pump / Compensation tank …
US $500-1,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Right Angle
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

ANG HB Industrial Gear box
Type Helical parallel shaft type, Bevel-helical right-angle type
Model H1/B1~H26/B26
Input power 3 ~ 5000 KW;
Input speed 750rpm ~ 1500rpm
Reduction ratio 1/1.25 ~ 1/450
Output torque  3 ~ 900kN.m
Install type Foot / Solid shaft / Hollow shaft / Output flange…
Efficiency Single-stage 98%, 2-stage 96%, 3-stage 94%, 4-stage 92%
Precision of gear Accurate grinding, class 6
Design position A / B / C / D / E / F / G / H / I
Accessories Back stop / Cooling fan / Cooling coil / Oil pump / Compensation tank …

Helical Gearbox

Using a helical gearbox can greatly improve the accuracy of a machine and reduce the effects of vibration and shaft axis impact. A gearbox is a circular machine part that has teeth that mesh with other teeth. The teeth are cut or inserted and are designed to transmit speed and torque.helical gearbox

Sliding

Among the many types of gearboxes, the helical gearbox is the most commonly used gearbox. This is because the helical gearbox has a sliding contact. The contact between two gear teeth begins at the beginning of one tooth and progresses to line contact as the gear rotates.
Helical gears are cylindrical gears with teeth cut at an angle to the axis. This angle enables helical gears to capture the velocity reversal at the pitch line due to the sliding friction. This leads to a much smoother motion and less wear. Moreover, the helical gearbox is more durable and quieter than other gearboxes.
Helical gears are divided into two categories. The first group comprises of crossed-axis helical gears, commonly used in automobile engine distributor/oil pump shafts. The second group comprises of zero-helix-angle gears, which do not produce axial forces. However, they do create heat, which causes loss of efficiency.
The helical gearbox configuration is often confounded, which results in higher working costs. In addition, the helical gearbox configuration does not have the same torque/$ ratio as zero-helix angle planetary gears.
When designing gears, it is important to consider the effects of gear sliding. Sliding can lead to friction, which can cause loss of power transmission. It also leads to uneven load distribution, which decreases the loadability of the helical planetary gearbox.
In addition, the mesh stiffness of helical gears is commonly ignored by researchers. An analytical model for the mesh stiffness of helical gears has been proposed.

Axial thrust forces

Several options are available for axial thrust forces in helical gearboxes. The most obvious is to use a double helical gear to offset the force component. Another option is to use a thrust bearing with a lower load carrying capacity. This becomes a sacrificial component.
In order to transmit a force, it must be distributed along the contact line. This force is the sum of tangential, radial and axial force components. All these components must be transferred from the source to the output. This is a complex process that involves the use of gears.
The axial force component must be transferred through the gears. The resultant force is then divided into orthogonal components and divided into the thrust directions. The radial force component is from the contact point to the driven gear center.
The axial force component is also determined by the size of the gear’s pitch diameter. A larger pitch diameter results in a greater bearing moment. Similarly, a larger gear ratio will produce a higher torque transmission.
It should be noted that the axial force component is only a small part of the total force. The normal force is distributed along the contact line.
The double helical gear is also not a perfect duplicate of the herringbone gear. It has two equal halves. It is used interchangeably with the herringbone gear. It also has the same helix angle.helical gearbox

Reduced impact on the shaft axis

Increasing the helix angle of a gear pair will reduce resonance effects on the shaft axis of a helical gearbox. However, this will not reduce the overall vibration in the gearbox. In fact, it will increase the vibration. This can lead to serious fatigue faults in the drive train.
This is because the helix angle has an effect on the contact line between two teeth. As the helix angle increases, the length of the contact line decreases. In addition, it has an effect on the normal force and curvature radii of the teeth. The pressure angle also affects the curvature radii.
Helical gears have several advantages over spur gears. These advantages include: lower vibration, NVH (noise, vibration and harshness) characteristics, and smooth operation under heavy loads. They also have better torque capability. However, they produce higher friction. They also require unique approaches to control their thrust forces.
The first step in reducing resonance effects is to regulate the meshing frequency of the helical gear stage. This can be done by varying the shift factors in the gear. If the shift factors are too large, then the gear will experience resonance effects. The helix angle is also affected by the gear’s shift factors. It is therefore important to control the gear’s geometry in order to reduce the resonance effects.
Next, the effects of the web structure and rim thickness on the root stress of the gear are examined. These are measured by strain gage. The results indicate that the maximum root stress is obtained when the worst meshing position is reached.

Quieter operation

Compared to spur gears, helical gears are much quieter in operation. This is due to their larger teeth. Aside from this, they have a higher load-carrying capacity. They also run smoother and have a higher speed capability. Helical gears are also a good substitute for spur gears.
The most significant parameter relating to noise reduction is the gear contact ratio. It ranges from below 1 to more than 10 and is determined by the number of teeth intersecting a parallel shaft line at the pith circle. It is also a good indicator of the level of noise reduction that helical gears provide.
In addition, helical gears have a lower impulse flexure than spur gears. This is because the contact point slides along the helical surface of each tooth. This also adds internal damping to the gear system.
While helical gears are less noisy than spur gears, they do have a high level of wear and tear. This can affect the performance of the gear. However, it is possible to improve the smoothness of the tooth surface by grinding. In addition, running the gears in oil can also help improve the smoothness of the tooth surface.
There are many industries that use helical gears. For example, the automotive industry uses them in their transmissions. They also are used in the agricultural industry. They are often used in heavy trucks.
Helical gears are also known to generate less heat and are quieter than other gears. They can also deliver parallel power transfers between parallel or non-parallel shafts.

Improved accuracy

Increasing the accuracy of a helical gearbox is the key to its operation and reliability. The accuracy of the gearbox is dependent on several features. Among the most important are the profile and lead. Moreover, the power requirements of a gear drive should be taken into consideration.
The profile is the most sensitive feature of a helical gear. If the profile is not symmetric, the gear will run with a noisy spur gear. In addition, the profile is also the most sensitive to lead.
A helical gearbox plays a key role in the power transmission of industrial applications. However, the heavy duty operating conditions make it susceptible to a variety of faults.
A helical gearbox’s performance depends on the accuracy of the individual gears. This is accomplished by minimizing the backlash. A common way to reduce backlash is to approach all target positions from a common direction. This approach also reduces transmission noise.
The accuracy of a helical gearbox can be improved by using a flexible electronic gearbox. This can reduce the degree of twist. Moreover, it can increase the accuracy of gear machining.
A helical gearbox with an electronic gearbox can increase the accuracy of twist compensation. It can also improve the linkage between B-axis, C-axis, and Z-axis. Moreover, the electronic gearbox will ensure the linkage relationship between Y-axis, Z-axis, and C-axis.
The accuracy of a helical Gearbox can be improved by calculating the position error of the gear train. Pitch deviation and helix angle deviation are two types of position error.helical gearbox

Reduced vibration

Using helical gearboxes can reduce vibration and noise. These gears are used in a variety of applications, including automotive transmissions. Moreover, these gears are quiet enough to operate in noise-sensitive applications.
Using CZPT software, three different gearbox housing designs are compared. The external dimensions and mass of each design are kept constant, but different quantities of longitudinal and transverse stiffeners are employed. The resulting models are then compared to experimental results. In addition, the free vibration response of these models is analyzed. The results are shown in Fig. 5.
In terms of noise reduction, the cellular model produces the lowest sound pressure level. However, the cross model produces the higher sound level. The cellular model also produces better peak to peak results.
The input-stage gear pair is the power source of the output-stage gear pair. The output-stage gear pair’s vibration is also studied. This includes a phase diagram and a frequency-domain diagram. The influence of the driving torque and the pinion’s velocity on the vibration is studied in a numerical manner. The time evolution of the normal force and the lubricant stiffness is also studied.
The input-stage pinion modification reduces the input-stage gear pair’s vibration. This reduction is achieved by adding dual bearing support to the input shaft.
China Hb PV Industrial High Power Torque Right Angle Bevel Helical Gear Box     bevel helical gearbox applicationChina Hb PV Industrial High Power Torque Right Angle Bevel Helical Gear Box     bevel helical gearbox application
editor by czh 2022-12-13

Recent Posts